食品機械設備網
詳細介紹
產品介紹：
倒吊桶式蒸汽疏水閥它是利用冷凝水和蒸汽的密度差的工作原理，內部結構是由杠桿系統連接倒吊桶嗡吸，克服蒸汽壓力開關倒吊桶式疏水閥內部是一個倒吊桶為液位敏感件拓坠，倒吊桶開口向下。裝置剛起動時哩拒，管道內出現空氣和低溫冷凝水赎遗，此時疏水閥是全開放，空氣和低溫冷凝水迅速排出曾谁，裝置很快提升溫度峰孝。當蒸汽進入倒吊桶內，倒吊桶產生向上浮力莱衩，倒吊桶連接杠桿帶動閥心關閉閥門爵嗅。倒吊桶上開有一小孔，能自動排空氣笨蚁，當一部份蒸汽從小孔排出睹晒，另一部份蒸汽產生凝結水，倒吊桶失去浮力向下沉赚窃，倒吊桶連接杠桿帶動閥心開啟閥門册招。當蒸汽再進入倒吊桶內，閥門再關閉勒极，循
環工作是掰，間斷排水
倒吊桶式蒸汽疏水閥是機械型蒸汽疏水閥中堅固的疏水閥之一，它的優點是：不怕水擊辱匿，能連續排不冷凝氣體键痛，抗污性能好；背壓≥90%匾七，所有內件都是不銹鋼制造絮短，耐磨損江兢、抗腐蝕；球形閥心和閥座是線接觸饶饿，密封性能好昙激，使用壽命長；間斷排水和連續排水湘涉，能排接近飽和溫度冷凝水赤猾，使加熱設備達到理想工作效率。倒吊桶式蒸汽疏水閥的閥座處于水密封的保護下若棒，工作時無活蒸汽泄漏照渴，節能效果好。
它適用于石油的唆、化工肩降、印刷、造紙求瞎、制藥等工業蒸汽加熱設備和蒸汽管網的阻汽排水屁样。
The inverted bucket steam trap is one of the most solid mechanical steam traps. It has the following advantages: it is not afraid of water hammer, can continuously discharge non condensing gas, and has good anti pollution performance; the maximum back pressure is ≥ 90%, all internal parts are made of stainless steel, wear-resistant and anti-corrosion; the ball valve core and valve seat are in line contact, with good sealing performance and long service life; intermittent drainage and continuous drainage It can discharge condensate close to saturation temperature and make heating equipment reach ideal working efficiency. The valve seat of inverted bucket steam trap is under the protection of water seal, and there is no live steam leakage during operation, so the effect of energy saving is good.
The product applies to such industrial steam heating equipment as petroleum,chemical,printing,paper making and pharmaceuticals and discharge of the steam pipe network.
環工作是掰，間斷排水
倒吊桶式蒸汽疏水閥是機械型蒸汽疏水閥中堅固的疏水閥之一，它的優點是：不怕水擊辱匿，能連續排不冷凝氣體键痛，抗污性能好；背壓≥90%匾七，所有內件都是不銹鋼制造絮短，耐磨損江兢、抗腐蝕；球形閥心和閥座是線接觸饶饿，密封性能好昙激，使用壽命長；間斷排水和連續排水湘涉，能排接近飽和溫度冷凝水赤猾，使加熱設備達到理想工作效率。倒吊桶式蒸汽疏水閥的閥座處于水密封的保護下若棒，工作時無活蒸汽泄漏照渴，節能效果好。
它適用于石油的唆、化工肩降、印刷、造紙求瞎、制藥等工業蒸汽加熱設備和蒸汽管網的阻汽排水屁样。
Inverted Bucket Trap
The interior of the inverted bucket steam trap:this valve adopts the operating principles of density difference between condensate water and steam,ａnd the leverage system connects with inverted bucket to form its internal structure,thus controlling the open and close of the steam pressure.The interior of the inverted bucket steam trap is an inverted bucket,a liquid level sensitive part,with the bucket's opening downward.When the device just started,air and low temperature condensate water occur in the pipes,at the moment the steam trap opens thoroughly,the air and low-temperature condensate water are discharged rapidly and the temperature of the device rises immediately.When any steam enters into the inverted bucket,the bucket will obtain buoyancy and the fixed lever of the bucket drives the valve core to close the valve.There is small aperture on the inverted bucket,which can discharge air automatically.As some of steam is discharged from such aperture,while other steam produces condensate water.The inverted bucket loses the buoyancy and sinks down and its fixed lever drives the valve core to open the valve.When the steam re-enters into the bucket,the valve will close again.It repeats the said procedures to discharge water intermittently.The inverted bucket steam trap is one of the most solid mechanical steam traps. It has the following advantages: it is not afraid of water hammer, can continuously discharge non condensing gas, and has good anti pollution performance; the maximum back pressure is ≥ 90%, all internal parts are made of stainless steel, wear-resistant and anti-corrosion; the ball valve core and valve seat are in line contact, with good sealing performance and long service life; intermittent drainage and continuous drainage It can discharge condensate close to saturation temperature and make heating equipment reach ideal working efficiency. The valve seat of inverted bucket steam trap is under the protection of water seal, and there is no live steam leakage during operation, so the effect of energy saving is good.
The product applies to such industrial steam heating equipment as petroleum,chemical,printing,paper making and pharmaceuticals and discharge of the steam pipe network.
優點：
1、對凝結水的發生量適應性強洞枷，既可間歇排放诺舔，又可連續排放鳖昌。
2备畦、內部裝有大排量的雙閥座差壓機和SCCV關閉系統，體積小而排量大许昨。
3懂盐、內部零件全部采用不銹鋼制造，并且安裝在閥蓋上維修保養極為方便糕档。
4莉恼、背壓率高（90%）。
5速那、汽水分離可靠（水汽經U型通道從閥下部進入）俐银，閥內始終處于水封狀態，有效阻止蒸汽泄露端仰。
6捶惜、敞口型的浮子抗水擊，吊桶上設有排水孔荔烧，可有效防止蒸汽氣鎖吱七、空氣氣堵現象（非凝結性的高溫空氣也排除）。7社殉、與杠桿機構結合制造高壓閥陷龟。
Merits
1.Strong adaptability to happening of condensate water,capable of intermittent or continuous discharge.
2.Equipped with double-valve pressure differentiator and SCCV shutdown system,with small size but large discharge capacity.
3.All inner parts made of stainless steel and mounted on valve covers,easy to maintain and repair.
4.High backpressure rate of 90%.
5.Reliable separation of vapor and water (vapor enters from the lower part of the valve through the U-shape passage),the inner part of the valve is in water seal state,which effectively prevents the leakage of steam.
6.Water-resistant open floater with gas vent through the bucket's vent,effective to prevent steam locking or air blocking(except the non-confensed high-temperature air).
7.Suitable to be joined with lever mechanism for producing high-pressure valve.
先導活塞倒吊桶式疏水閥/PISTON INVERTED BUCKET TRAP
技術參數/Technique parameter
殼體壓力等級 Shell pressure grade | 負荷泄漏率 Load leakage | 使用介質 Used medium | 允許背壓率 Permitted backpressure rate | 節能效果 Energy saving effect | 排空氣裝置 Air exhaust system |
2.5眨涯、 4.0、 6.4逻事、 12MPA | ≈0% | 蒸汽凑溜、 凝結水 Steam、 Condensate water | ≥90% | 優秀 Excellence | 自動 Automatic |
工作壓差 Maximum operating pressure differential
| 排出高溫氣體 Discharging of high- temperature air | 排水方式 Drainage method | 允許溫度 Maximum allowable temperature | 抗水擊 Resis | |
12MPA | 適應 Adaption | 間接方式 Indirect way | 420℃ | 適應 Adaption | |
主要零件材料/The materials of primary accessories
零部件名稱 Part and component name 材質 Material 閥體畜溺、閥蓋 Valve body量懂、Valve cover 鑄鋼、不銹鋼蔼说、合金鋼 Cast-iron仿竣、WCB、Stainless steel 吊桶唐绍、杠桿 Inverted bucket氢觉、Lever 304/316不銹鋼 304/316 Stainless steel 閥座、閥瓣 Valve seat仗扬、Valve clack STL合金症概、高鉻不銹鋼 STLAlloy、High chrome早芭、stainless steel 過濾網 Filtrating screen 不銹鋼 Stainless steel
外形尺寸和重量/Prime out-form dimensions and weigh
產品型號 Product model | 口徑(DN) Calibre | L法蘭 Flange | L螺紋/ 焊接 Thread/ welding | H1 | H2 | W | 重量(kg) weight | 使用壓力 范圍(MPa) Pressure change range | 公稱壓力 (MPa) Nominal pressure |
ER25(W) | 15-25 32-50 | 380 380 | 340 380 | 210 210 | 180 180 | 345 345 | 45 47 | 0.1-4.5·6.5 | 6.4-100 |
注解：
1彼城、選型時請?zhí)峁┕ぷ鲏毫Α⒐ぷ鲏翰钔烁觥⒛Y水發生量募壕、工作溫度、連接方式及標準语盈。
2舱馅、凝結水負荷的安全系數一般為2~3倍
3、正確安裝刀荒、定期保養清除閥內污物代嗤，保證疏水閥正常工作和延長使用壽命。
4缠借、型號尾數數值相同干毅，其排水量也相同。
Note
1.Please provide operating pressure and operating pressure difference,generating quantity of condensate water,operating temperature,connecting mode and standards in selecting product models.
2.The load of condensate water’s safety coefficient reaches 2 to 3 times in general.
3.Please make sure the drain valve is installed properly,maintained regularly,cleaned up and operates under the normal condition,so as to extend its service life.
4.The products with same mantissa figure at their models have the same discharge capacity.
食品機械設備網